Everything you need to specify it.

Each surface has its own panel sizes, up to 3150 mm long and 1200 mm wide. Other formats are made to order.

• Travertine1200 × 600 mm
• Travertine Oceanic2400 × 600, 2400 × 1200, 3000 × 1200 mm
• Milan Travertine1200 × 600, 2400 × 600, 2400 × 1200, 2900 × 600, 2900 × 1200 mm
• Linear Travertine1200 × 600, 2400 × 600, 2400 × 1200, 2900 × 600, 2900 × 1200 mm
• Slate1200 × 600, 2400 × 1200 mm
• Rough Granite1200 × 600 mm
• Rockface Stone900 × 600 mm
• Cut Stone1200 × 600 mm
• Age Stone2980 × 1200 mm
• Muretto600 × 300 mm
• Rusty Red1200 × 600, 2400 × 1200 mm
• Dolomitic Marble Pillar3000 × 600, 3000 × 1200 mm
• Danxia Rammed Earth Board2400 × 580 mm
• Gobi Rammed Earth Board2980 × 1200 mm
• Concrete Board3060 × 600, 3060 × 1200 mm
• Wood Concrete Board2950 × 565, 2950 × 1130 mm
• Roman Pillar3000 × 600 mm
• Morocco1460 × 590 mm
• Weaving1500 × 600 mm
• Sawing Wood Board3150 × 580 mm
• Woven1500 × 600 mm
• Line Stone Board3000 × 600 mm
• Brick230 × 58 mm

With CrestStone adhesive, on a dry, dust-free substrate, and grouted. Five steps to a finished wall.

1. 01Surface preparationThe substrate must be dust free and completely dry before setting out. Do not wet it at any stage. Remove debris and any raised or uneven areas first.
2. 02AdhesiveUse the CrestStone adhesive suited to the substrate. The adhesive chart says which, or ask us.
3. 03Cutting and installationMark with a lead pencil and cut to the line. Install vertically or horizontally, as the design asks.
4. 04GroutingFill the joints and finish the grout line as specified.
5. 05CleaningWipe off excess grout with a damp sponge while the grout is still half set.

Yes. Every panel is laboratory tested for fire resistance, water absorption and impact stability.

Any colourway, cut to hand size, sent to your studio or the site.